Our range of flooring preparation and ancillary products help to either prepare, optimise or complete a full weberfloor solution.
Flooring preparation & ancillary products
Primers
Our floor primers are used for pre-treating all substrates prior to the application of weberfloor solutions.
weberfloor 4716 primer is a water-borne floor primer dispersion which can be used as an alternative to a latex floor primer. This product doesn't contain ammonia and offers good alkali resistance and adhesion properties in both wet and dry environments.
weberfloor 4720 epoxy primer is a two-component epoxy primer that bonds well into the substrate and increases the bonding tensile strength between substrates. weberfloor 4720 epoxy primer can be used as a primer or bonding agent as part of weberfloor solutions.
Moisture control
Moisture control systems are used to suppress the passage of residual construction moisture as measured with a hood hygrometer.
weberfloor MVS is a water-based moisture vapour suppressant which can suppress the passage of moisture up to 95% relative humidity. weberfloor MVS facilitates accelerated project timelines by allowing the rapid installation of weberfloor solutions.
weberfloor DPM Pro is a two-component epoxy based damp proof membrane that is capable of being applied in one coat and can be applied onto concrete or cement-based screed surfaces with a moisture content of up to 98% relative humidity, prior to the application of weberfloor solutions.
Ancillary products
weberfloor 4945 is a glass fibre reinforcement mesh which has alkaline-resistant impregnation and can be used as part of some weberfloor solutions. This product is usually used on weak substrates or in case the screed is laid nonbonded.
weberfloor 4955 is an acoustic glass mat laminated with two protective polythylene foils. This thin mat is for impact sound reduction on floors in new buildings and renovation and forms as part of weberfloor acoustic solutions.
weberfloor height markers are self-adhesive floor markers which indicate the thickness of floor screed – up to 100mm – as it is being applied.
Check for cracks and damage to the substrate
weberfloor substrate repair system is a crack and patch repair system of three products which prepare a flooring substrate prior to the application of weberfloor flooring systems.
We'll help you find the right system
Simply answer two questions about your specific project needs, and our Flooring System Selector will show you options for a complete flooring solution from Weber.