Flooring Systems from Saint-Gobain Weber UK & Ireland

Frequently Asked Questions: Flooring

Application advice

Applying our products correctly is key to ensuring a perfect final finish that will stand the test of time, find answers to some common queries other people have had when using our products.

How many coats of primer do I need?

At least 2 coats of primer are required. Primer must be applied by brush as opposed to roller or spray application.

When can I apply a floor covering to the levelling layer?

For normal drying products, follow the guidance of the manufacture of the adhesive/floor covering. This will generally require the floor to be below 75% relative humidity.

How much water do I add to the mix?

Refer to the datasheet information. A flow table and ring should be used for machine mixing.

Coverage & shelf life

It's important to understand what the coverage is for our products in the way you want to apply them so that you can quantify the total amount required for your project. Similarly, shelf life and storage requirements are important to ensure the long-term effectiveness of our products.

What is the shelf life of weberfloor products?

The shelf life should be on the datasheet and the packaging. For most products, the shelf life is 12 months.

Is the date on the bags the use by date?

No, the date on the bags is the manufacture date.

Can I add more water to make it go further?

No, never add more water than recommended or try to re-mix material after its pot life.

Documentation, certification & compliance

Some projects require additional third party certifications and you may need to seek advice for particular building regulations.

Where can I get the technical datasheets for weberfloor products?

All the datasheets for the products can be found by either visiting the relevant product page, or by searching in our Download Centre.

Product & substrate suitability

Checking the viability of our products against your project needs and substrate available is the first step to getting your project started.